6 replies to this topic

[satelite]

Greetings to all here in the forum, please excuse my writing in English but I am using the google translator. I read the post written here and found nothing to help me. I have a Bullet 2HP and follow the instructions you have in the page hotspotsystem.com the problem is that after doing everything and load the .bin the Bullet does not connect to internet and not the page that appears when I log in I have hotspotsystem. pers. I made the account on March 4, 2012 and since that day I'm trying to put to work my Bullet and I could not. Anyone have some instructions or step by step how to configure the Bullet. Help and thanks for your time.


Saludos a todos aquí en el foro, perdonen mi escritura en ingles pero estoy usando el traductor de google. Estuve leyendo los post aquí escrito y no encontré nada que me pueda ayudar. Tengo un Bullet 2HP y seguí las instrucciones que ustedes tienen en la pagina de hotspotsystem.com el problema es que después de hacer todo y cargar el bin el Bullet no se conecta al internet y tampoco aparece la pagina que tengo cuando me registre en hotspotsystem.com. yo hice la cuenta el día 4 de Marzo de 2012 y desde ese día estoy intentando de poner a trabajar mi Bullet y no he podido. Alguien tiene algunas instrucciones o paso a paso de cómo configurar el Bullet. Ayuda y gracias por su tiempo.

Edited by satelite, 07 March 2012 - 02:26 AM.

[Marko]

Hello,

The step by step instructions for configuring the bullet can be found here: http://www.hotspotsy...e_ubiquiti.html

Make sure that your settings match. Also, you mentioned the bullet cannot connect to the internet. Please check your WAN settings or the upstream router, because the router needs to have an internet connection for the splash page to work.

[satelite]

Hello

I followed step by step instructions for configuring the Bullet, adjustments are made as directed, but still does not work. Do I have to make adjustments in the account? When I disable or remove the SYSTEM HOTSPOT mark, then I have internet. Thank you for your help.

and this post images of my settings.

Attached Images

• 
• 
• 
• 
• 
• 
• 
• 

Edited by satelite, 08 March 2012 - 02:38 AM.

[Marko]

Did you change the firmware to our firmware? On the SERVICES tab, after you enable hotspot make sure you click START CHILLI . When you connect to the router it should give you an ip address on the 192.168.182.0 network. If still does not work send me a screenshot of your hotspot settings.

[satelite]

Hello

I followed the instructions you left me here written. And if I have internet, the problem is not coming out the prices page. Thank you for your help.

Attached Images

• 
• 

[Marko]

What is your operator id?

[satelite]

Thanks friend, the hotspot is already working, and the username is wp3of. Thank you for your help. I am a friend of wp3of.