Installation Guide Installation Guide for Mikrotik Routerboards

How to Setup Your Own Hotspot with MIKROTIK routers

Important note: This solution requires a Hotspot Operator Account at You can create an Operator Account here. If you would like to see what features you will be able to use with our solutions, click here. If you already have an Operator Account, then read on...


- Please make sure your Mikrotik device is running RouterOS version 6.32 at least. You can find more information on how to check and upgrade RouterOS at the official Mikrotik Wiki.

- Please make sure that you have Winbox available on your computer (unofficial Mac version can be downloaded from here) – WebFig is not going to work with our setup method

- Please make sure that you have a working Internet connection, else the configuration will fail. Plug in your Internet uplink cable to port 1 (ether1) and connect your computer to one of the unused LAN ports of the Mikrotik router. If you plan to use port2 as hotspot port use port3 during the installation. (The configuration must be done with a wired connection, it will not work wireless.)

- Start your router and wait until it boots (you should hear a couple of beeps), then open Winbox. Your router should appear in the Neighbours list – if not, you can either click Refresh until it appears or just type the MAC address of your device into the Connect To field (You can find the MAC address on the bottom of the casing or on the box).


- If you see the following dialogue box, then click on the Remove configuration button:


- If you haven't seen it, go to System Reset Configuration → Tick the No Default Configuration checkbox, leave the rest unticked and click on Reset Configuration.


Your router will reboot, so when it becomes available, please connect to it again.

- Log in to the Control Center on our website, and go to the Locations page (Manage/Locations). Click on the location name for the hotspot information page.

- Click on Modify Hotspot Data & Settings, then in the Splash Page Settings change the Internal Login/Logout URL Set to Mikrotik, then click Submit.

- Once you're back to the Location Detials page, scroll down to the ROUTER SETUP COMMAND FOR THIS LOCATION section, select Mikrotik, then verify the settings there if you want to setup a wireless hotspot (set wlan1 for the hotspot interface) or a hotspot gateway (set ether2 for the hotspot interface), then copy the setup commands (You can use the Highlight Text button and right-click on the script, then select copy).

- In Winbox, look for New Terminal in the left menu and click on it, then paste the commands into the new window appearing either by right-clicking into the terminal window and selecting paste or with the Shift + Insert key combination (please wait until the prompt is displayed).

- Once the script has finished (make sure you see an empty prompt, else just press Enter to execute the last command), you can close this window and set a router password under SystemPassword.

In rare occasions the hotspot isn't working after the script has finished. In this case just restart the router (either by SystemReboot or by unplugging it from the mains for a minute).

If you are a White Label operator, you need to copy and edit two files from the hotspot folder on your device. Click on Files, and drag & drop login.html and alogin.html onto your desktop. Open them in a text editor and replace with your White Label hotspot FQDN. Save the files and drag them back making sure that they are in the hotspot folder. Then open a New Terminal and issue the following command: /ip hotspot walled-garden add dst-host=* where is your white label domain.

Installa subito un hotspot!
Non è necessaria alcuna carta di credito.
  Sign up for free
Choose your language:
©2006-2024 HotspotSystem, Inc. Tutti i diritti riservati.